2 or 3 or 4 head Rotating beacon

The aeronautical beacons AL-2000shall comply with the requirements of ICAO Annex 14 Volum I Paragraph 5.3.3,and to FAA L-801 AC150/5345-12C and French STNA standards. Depending on its version, it shall besupplied in 230 Vac or 120 Vac (50/60 Hz).  It shall be equipped with 2 PAR 64 lamps(1000 W or 500 W). The life duration of the lamp shall be greater than 4000hours. It shall be with coloured filters(Green or Yellow)  All external metallic parts shallbe painted (RAL 1021).  Its installation is simple due tothree fixing flanges.

Security: The 2 lamps beaconstop immediately when at least one lamp is blown. Consumption: Electrical Box = 150 W + 2 lamps (of 500 W or 1000 W). Colours:  Obtained using coloured Filters(Green—Ground aerodromes, Yellow for water aerodromes, Green and Yellow for FAA(L-801H) heliport.  Flashes frequency: 26flashesper minute. Light head elevation angle: Possible adjustment possible from –5°to +35°.  Finish: All external partsare painted RAL 1021, except lights protections that are in stainless steel.  Fixing:  By three holes located on the three fixation flanges


  • 2 or 3 or 4 heads version
  • Automatic lamp switch (4 heads version)
  • Easy instalation
  • Light intensity up to 400'000cd
  • Visual range uo to 30 miles
  • Lamp PAR64 500W or 1000W
  • Made in Switzerland


  • Colored filter
  • Stainless steel
  • Heater (with thermostat)

Compliance & Certifications

  • Annexe 14, Volume I, 5.3.3
  • FAA L-801 AC150/5345-12C

Light colors